Introduction

Frequently Asked Questions

1. Authentication

  1. Why am I not asked for username and password?

  2. How can I change security settings of Internet Explorer?

2. Bottero(OPT) NC Generation and Transfer

  1. Do I have to do any settings before making the NC codes for Bottero?

  2. How can I make NC code File for Bottero in PLUS 2D?

  3. How can I transfer Bottero NC file (.OPT) into the Bottero Machine?

  4. For Network license version, it is not allowed to set NC folder path on client machine?

  5. For Network license, it is not allowed to generate NC files on client machine from Output page?

3. Intermac (OTD) NC Generation and Transfer

  1. Do I have to do any settings before making the NC codes for Intermac?

  2. For Intermac, how can I make NC code File in PLUS 2D?

  3. How can I transfer Intermac NC file (.OTD) into the Intermac Machine?

4. Bystronic(XYZ) NC Generation and Transfer

  1. Do I have to do any settings before making the NC codes for Bystronic?

  2. How can I make NC code File for Bystronic in PLUS 2D?

5. Vetromac(ISO) NC Generation and Transfer

  1. Do I have to do any settings before making the NC codes for Vetromac?

  2. How can I make NC code file for Vetromac in PLUS 2D?

6. Data Entry

  1. How can I add new stock to the inventory database?

  2. How can I merge two Job Files?

  3. I have all the stocks/part information in a spreadsheet. How can I import it into the software?

  4. Should I manually type a huge list of stocks in the job file every time?

7. DXF Importing

  1. What version of AutoCAD DXF files are supported?

  2. How Can I import a Ellipse made in a DXF file in PLUS 2D?

  3. How to set the PELLIPSE to 1 (or ON mode)?

8. Installation Problems

  1. Malicious Script Detected on Installation?

  2. How can I enable Nirvana Macro for PLUS 2D label printing?

  3. Why some users are experiencing license issues during start up in a Network Installation of PLUS 2D? Or Why am I getting Error 14 when I try to connect from a client of PLUS 2D server?

  4. I have a network lock, but when I try to run the network server program on a standalone system (which does not have network), I get the "fatal error 10065" and PLUS 2D runs in the demo mode.

  5. Is there any method with which the PLUS server will work on a standalone system.

  6. What is a Loopback Adapter?

  7. How to Install the Loopback Adapter?

  8. How can I make the PLUS Server software to start automatically when the computer, in which it is installed, is Booted?

9. Inventory

  1. Why is the update inventory button disabled?

  2. What is the ID column in the inventory management database table?

  3. If I feed a stock in the stock table which is similar to a stock in the database , then upon optimization will the stock in the database get updated?

  4. Does the ID of the Stock/Part have to be numeric?

10. Miscellaneous

  1. What is the significance of the 'CONFIRM' column in Summary of Layouts in Summary Page?

  2. Why is there a Re nest button?

  3. Can I change the units of measuring stock and part dimensions?

  4. Why are some parts highlighted in RED color?

  5. What is the significance of Rotation in parts?

  6. Regional and Language Setting

11. Hardware Locks

  1. What are Hardware locks. What types are available ?

  2. How do I use the hardware lock ?

  3. Where can I get the drivers for the hardware locks ?

  4. How to run the "Display Lock" Utility received for verifying the lock?

  5. How to take screen shot of the information displayed?

12. Network Lock

  1. What is the 5 User Network License?

  2. Is there any attachment needed to run the software with Network License?

  3. How can I install the software with Network License?

  4. How to run the application after the installation is complete?

  5. How to check whether the client machines are on the same network as the Server machine?

  6. How can I find out how many users are currently logged on the server?

  7. What are the checks to be done during Network Licence installation.

13. Optimization

  1. Are offcuts considered in utilization percentage?

  2. Though the entire stock is not used, I am getting the utilization as 100 % Why ?

  3. What is the difference between quick and optimized results?

  4. Will the package utilize the offcuts generated first or the fresh sheets?

14. Output

  1. What is Text Mirroring Effect?

  2. I want my company name to be displayed in every RTF output?

  3. How can I add Headers and Footers in the Output?

15. Software License Transfer

  1. How can I transfer my license from one computer to other?

  2. How to unregister a program?

16. Tables

  1. How do I add a new row in the tables?

  2. How do I delete a row in the table? 

  3. How can I sort the items in the Tables?

  4. Can I change the size or order of the rows in the tables.

  5. Can I change the width or the order of the columns?

  6. Why are some cells in a different color?

  7. How can I import data into the tables?

  8. Can I add one or more columns to the stock or part table?

  9. How can I edited a few selected cells of the table directly?